Who Sets Canada's Drinking Water Limits?
Canada's drinking water limits are published in the Guidelines for Canadian Drinking Water Quality. Health Canada develops them together with the provinces and territories through the Federal-Provincial-Territorial Committee on Drinking Water.
There's an important detail: the federal guidelines are not law on their own. Drinking water is regulated by the provinces and territories, which adopt the guidelines into their own regulations, often word for word, sometimes with changes. That's why rules for municipal systems, testing frequency and private wells differ from province to province.
The Types of Values You'll See
| Term | What it means | Example |
|---|---|---|
| MAC: Maximum Acceptable Concentration | A health-based limit, set so that drinking the water over a lifetime does not pose a meaningful health risk | Lead: 0.005 mg/L |
| AO: Aesthetic Objective | A limit for taste, odour or appearance. Exceeding it isn't a health risk on its own | Iron: 0.3 mg/L |
| OG: Operational Guidance value | A target for treatment performance, used by utilities | Turbidity in filtered water |
| Objective | A newer kind of value, used where the science supports a target but not a classic MAC | PFAS: 30 ng/L (sum of 25 PFAS) |
Key Limits Every Household Should Know
| Parameter | Guideline | Type | Why it matters |
|---|---|---|---|
| E. coli | None detectable per 100 mL | MAC | Sign of fecal contamination; boil and test again |
| Total coliforms | None detectable per 100 mL | MAC | Sign that bacteria are getting into the system |
| Lead | 0.005 mg/L (5 µg/L) | MAC | Affects children's brain development; comes from plumbing |
| Arsenic | 0.010 mg/L (10 µg/L) | MAC | Linked to cancers; mainly in groundwater |
| Nitrate (as N) | 10 mg/L (= 45 mg/L as nitrate) | MAC | Risk to infants; from fertilizer and septic systems |
| Fluoride | 1.5 mg/L | MAC | Dental fluorosis above the limit |
| Uranium | 0.02 mg/L (20 µg/L) | MAC | Kidney effects; naturally occurring in some rock |
| Manganese | 0.12 mg/L (MAC); 0.02 mg/L (AO) | MAC + AO | Health effects at high levels; staining at low levels |
| Copper | 2 mg/L (MAC); 1 mg/L (AO) | MAC + AO | From copper pipes; blue-green stains |
| Trihalomethanes (THMs) | 0.100 mg/L (100 µg/L) | MAC | Disinfection byproduct |
| Haloacetic acids (HAA5) | 0.080 mg/L (80 µg/L) | MAC | Disinfection byproduct |
| Chloramines | 3.0 mg/L | MAC | Disinfectant used in many cities |
| PFAS | 30 ng/L (sum of 25 PFAS) | Objective | "Forever chemicals"; objective set in 2024 |
| Sodium | 200 mg/L | AO | Taste. People on low-sodium diets: see your doctor if above 20 mg/L |
| Iron | 0.3 mg/L | AO | Rusty stains and metallic taste |
| Chloride | 250 mg/L | AO | Salty taste; can increase corrosion |
| Sulphate | 500 mg/L | AO | Bitter taste; laxative effect |
| Total dissolved solids (TDS) | 500 mg/L | AO | Overall taste |
| pH | 7.0–10.5 | Operational | Corrosion control |
Guidelines are updated periodically. Check Health Canada's current summary table for the latest values.
What About Hardness?
There's no guideline for hardness, because calcium and magnesium aren't a health concern. Health Canada notes that water around 80–100 mg/L (as calcium carbonate) balances corrosion and scaling, above 200 mg/L is considered poor, and above 500 mg/L is unacceptable for most domestic purposes. See Hard Water vs. Soft Water.
Recent Changes Worth Knowing
- Lead (2019): the MAC was halved from 0.010 to 0.005 mg/L, and Health Canada now recommends sampling at the tap, where people actually drink.
- Manganese (2019): a health-based MAC of 0.12 mg/L was added alongside the aesthetic objective.
- PFAS (2024): a drinking water objective of 30 ng/L for the total of 25 PFAS replaced the earlier approach of separate values for PFOA and PFOS.
How to Read Your Results Against the Guidelines
- Match the units. 1 mg/L = 1,000 µg/L = 1,000,000 ng/L. A lead result of "4 µg/L" is 0.004 mg/L, which is under the 0.005 MAC, but close.
- Match the form. Nitrate can be reported "as N" (limit 10 mg/L) or "as nitrate" (limit 45 mg/L). They describe the same limit.
- Know what "ND" means. "Not detected" means below the lab's detection limit, not necessarily zero. Ask the lab what that limit was.
- One sample is a snapshot. Many MACs are based on lifetime exposure. A single result near the limit is a reason to retest, not to panic. Bacteria are the exception: any E. coli means act now.
- Separate health from aesthetics. A high iron or hardness result is a nuisance. A high arsenic or lead result is a health issue.
Who Is Responsible for Testing?
- Municipal water: your utility tests continuously and publishes annual reports. Look up yours with our postal-code report.
- Private wells: you are responsible. Test for bacteria at least two to three times a year and for chemistry such as arsenic, uranium, nitrate and fluoride every few years. Find an accredited lab, and read our private well testing guide.
- Your home's plumbing: lead and copper are picked up inside buildings. Only a tap test tells you what you're drinking.
Related Reading
Educational Content Notice
This article is provided for general educational purposes only. The Canadian Institute for Water Quality Education does not endorse specific commercial products or services. Always consult a certified water professional for advice specific to your situation.

